BMW 528I XDRIVE - Manual (Page 78)

Co
n
tr
o
ls
O
ve
rvi
ew
76
To reset average fuel consumption: press BC
button on turn signal lever for approx. 2 sec-
onds.
For different routes
You can display the average speed and average
consumption for two different routes on the
Control Display, refer to the following and to
Trip computer
* .
Displays on the Control Display
You can also call up the computer via iDrive.
For operating principle refer to page
16 .
1. "Vehicle Info"
2. "Onboard info" or "Trip computer"
Displays on the "Onboard info":
> Cruising range
> Distance from destination
> Estimated time of arrival, provided that a
destination was entered in the navigation
system
* , refer to page 133 .
Displays on the "Trip computer":
> Departure time
> Trip duration
> Trip distance
Both displays show:
> The average speed and
> the average fuel consumption.
Resetting the fuel consumption and
speed
You can reset the values for the average speed
and average fuel consumption:
1. Select the respective menu item and press
the controller.
2. To confirm your selection, press the con-
troller again.
Resetting the Trip computer
1. "Vehicle Info"
2. "Trip computer"
3. "Reset"
All values are reset.
Setting the units of measure
You can change the units for fuel consumption,
route/distance, temperature and pressure.
iDrive, for operating principle refer to page
16 .
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG