Dascom TallyCom III IBM AS400/iSeries Host Print Set-up Guide - Manual (Page 31)

2. Define the Telnet 5250e session
Using PrintGuide, locate the Telnet session and highlight it:
3. Double-click on the highlighted session.
Type in the Device Name. This must be a unique name on the AS/400 that you
wish to connect to. It can have up to 10 characters.
Type in the Host IP Address of the AS/400 you wish to connect to.
The standard Telnet port 23 is used for the Host Port and is predefined.
Click OK and then downlooad the settings to the PrintServer, selecting the option
to restart the Server.
31