1 psf/mvs afp printing using tcp/ip, 1 psf/mvs direct attachment, 2 psf/mvs start-up procedure – Dascom TallyCom III IBM AS400/iSeries Host Print Set-up Guide User Manual
Page 3: Psf/mvs afp printing using tcp/ip, Psf/mvs direct attachment, Psf/mvs start-up procedure, 1psf/mvs afp printing using tcp/ip
1
PSF/MVS AFP Printing Using TCP/IP
This chapter provides information on how to create MVS definitions for printing
from PSF/MVS via TCP/IP. The following topics are addressed:
JES printer statements
PSF Start-up procedure
Once these parameters have been configured, and the basic TCP/IP installation of
the PrintServer with IPDS has been completed, direct AFP / IPDS from PSF / MVS
will be possible.
MTU size:
• The Maximum Transmission Unit (MTU) of the IP packet for the MVS
system is recommended to be set up to 2000.
NOTE: The MTU size should not exceed the maximum size sent through
the control unit. Failure may lead to transmission problems.
1.1 PSF/MVS direct attachment
Sample PSF/MVS JES2 initialisation statements
FSSDEF(FSS1)PROC=PSF4,HASPFSSM=HASPFSSM
PRT420
FSS=FSS1,MODE=FSS,PRMODE=(LINE,PAGE),
CLASS=A,UCS=0,SEP,NOSEPDS,CKPTPAGE=100,DRAIN,WS=(R,Q/FCB)
Example of PSF/MVS JES2 printer definition
1.2 PSF/MVS start-up procedure
//PSF4 PROC
//STEP01 EXEC PGM=APSPPIEP,REGION=1750K
//JOBHDR OUTPUT PAGEDEF=V06483, /* JOB SEPARATOR PAGEDEF */
// FORMDEF=A10110,CHARS=GT15 /* JOB SEPARATOR FORMDEF */
//JOBTLR OUTPUT PAGEDEF=V06483, /* JOB SEPARATOR PAGEDEF */
// FORMDEF=A10110,CHARS=GT15 /* JOB SEPARATOR FORMDEF */
//DSHDR OUTPUT PAGEDEF=V06483, /* DS SEPARATOR PAGEDEF */
// FORMDEF=A10120,CHARS=GT15 /* DS SEPARATOR FORMDEF */
//MSGDS OUTPUT PAGEDEF=A06462, /* MESSAGE DATASET PAGEDEF */
// FORMDEF=A10110 /* MESSAGE DATASET FORMDEF */
//********************************************************************
//*
//* THIS PROC. IS TO BE USED FOR 300 DPI DEVICES
//* -----------
//********************************************************************
//FONT01 DD DSN=SYS1.FONTLIBBB,DISP=SHR /* FONTS - 300 DPI */
// DD DSN=SYS1.FONT300,DISP=SHR /* SYSTEM FONTS - 300 DPI */
//*-------------------------------------------------------------------
//PSEG01 DD DSN=SYS1.PSEGLIB,DISP=SHR /* SYSTEM PAGE SEGMENTS */
//*-------------------------------------------------------------------
//OLAY01 DD DSN=SYS1.OVERLIB,DISP=SHR /* SYSTEM MEDIUM OVERLAYS */
//*-------------------------------------------------------------------
//PDEF01 DD DSN=SYS2.PDEFLIB,DISP=SHR /* SYSTEM PAGEDEFS */
// DD DSN=SYS1.PDEFLIB,DISP=SHR /* SYSTEM PAGEDEFS */
3