Dascom T2280+2T Quick Start Guide - Manual (Page 7)

Installation
➤
Unpacking the printer
Place your printer on a solid base.
Make sure that the “Up” symbols point in the correct direction.
Open the packaging, take out the accessory cassette and unpack
it. Pull the printer out of the cardboard box towards you and
remove the remaining packaging material.
Check the printer for any visible transport damage and missing
items. In addition to this Operator’s Manual (
➀) the CD-ROM
( ➁, at the back of this manual), the power cable (➂) and the
ribbon ( ➃) must be included.
If you find any transport damage or if any accessories are
missing, please contact your dealer.
➀
➁
➂
➃
ENGLISH
Quick start guide Installation
5