Dascom 1325 User Guide - Manual (Page 31)

Tally Dascom 1325
17
Power-On State
Function
Name
Switch
Operation
LED Function Description
Menu Setup /
EDS
[S1]
- Allows for Main Menu setting changes. Please read the
instructions printed on how to change settings when this
mode is activated. (EDS: Electronic DIP Switch)
Slip Setup [S2]
- Configures the Slip paper profile such as top and left
margins. Refer to Slip Setup section below for details.
Hex Dump [S3]
- Beeps once to indicate going into hex dump mode:
 Prints data from host in hexadecimal representation.
 Pressing S4 suspends the printing.
 When the hex dump has finished, pressing S4 forces the
printing of the last line of data, as any line termination
control code from host has no function.
 Switch off the power to terminate the hex dump.