Dascom 1325 User Guide - Manual (Page 24)

Tally Dascom 1325
10
3 Paper Installation Guide
The printer can handle either single sheets or continuous forms. Single sheets, also called cut sheets, include
envelopes and non-continuous, multipart forms. Continuous forms include labels and multipart forms fed into
the printer using the forms tractors. The printer is able to print 1~7 plies multipart paper.
Do not load paper that has been folded or is damaged, wrinkled, or curled.
Adjusting the Print Gap Lever
The print gap lever is on the right side of the printer. Take care to adjust the print gap lever to a suitable
position whenever you change the number of copies being printed. Using the wrong print gap may cause print
head damage or paper jams.
Paper type Weight (g/m 2 ) / ply Thickness (mm) Gap lever position
Single sheet 52～100 0.06～0.12
1P～2P
2-ply 40～52 0.12～0.14
3-ply 40～52 0.17～0.22
3P～4P
4-ply 40～52 0.23～0.27
5-ply 40～52 0.28～0.33
5P～6P
6-ply 40～52 0.34～0.38
7-ply 40～52 0.39～0.45 7P
7-ply above 40～52 0.45～0.58 Change ribbon
Print Gap Lever