Dascom 7206 Peeler Installation and User Guide - Manual (Page 3)

– 3 –
Installation Guide
0 The following installation shows a 7106 printer. The peeler installation for 7206
printers follows the same steps.
1 Before installing the Peeler Unit
1-1 Remove the plastic front cover on the front side of the printer upward as shown
below.
Be careful that you do not touch other parts when removing the front cover.
1-2 Remove the screw (M3 X 6) of the motor cover and take the motor cover out
as shown below.
Remove the
screw and the
motor cover