Dakota Ultrasonics MMX-6DL User Manual
Page 9
MMX-6 DL Ultrasonic Thickness Gauge
5
The UP arrow key has three functions. When the MMX-6 DL is in
calibration mode, this key is used to increase numeric values on the
display. An auto-repeat function is built in, so that when the key is held
down, numeric values will increment at an increasing rate. When MODE is
activated, the UP arrow key scrolls through the various features and
settings of the MMX-6 DL. When the data logging feature has been
activated by pressing the MEM key, the UP arrow is used to scroll through
the various files, storage locations, and functions of the data logger. Refer
to page 28 for further inform ation regarding the use of the UP arrow key
and the data logger.
The DOWN arrow key has three functions. When the MMX-6 DL is in
the CAL mode, this key is used to decrease numeric values on the display.
An auto-repeat function is built in, so that when the key is held down,
numeric values will decrement at an increasing rate. When MODE is
activated, the DOWN arrow scrolls through the various features and
settings of the MMX-6 DL. When the data logging feature has been
activated by pressing the MEM key, the UP arrow is used to scroll through
the various files, storage locations, and functions of the data logger. Refer
to page 28 for further information regarding the use of the DOWN arrow
key and the data logger.