Dakota Ultrasonics MMX-6DL User Manual
Page 34
Dakota Ultrasonics
30
9) Repeat step 8 as required.
Clearing a Storage Location
The user may require a storage location, that is currently full, be over
written. This procedure is outlined in the following steps:
Note:
§ Assuming the steps in Using The Data Logger have been
completed, and step 8 is being repeated.
1) Press the UP / DOWN arrow keys to move to the location to be
over written.
Note:
§ If the user attempts to write to a location that is currently full, the
display will flash the FuLL symbol.
2) Press the CLR key to delete the contents of the storage location.
The display will flash the storage location ( L011, L099, etc. ) and
the CLr symbol.
3) Take another measurement, and press the SEND key to write to
the same storage location just cleared.