Dakota Ultrasonics MMX-6DL User Manual
Page 37
MMX-6 DL Ultrasonic Thickness Gauge
33
Printing a File
The user may wish to print an individual file to a serial printer or
computer. A file can, very simply, be printed to a communications
program on a PC ( i.e. Windows 3.1 - Terminal, Window 95/98/Me/XP
- HyperTerminal ), and then printed. The procedure for printing a file is
outlined below:
1) Refer to the section on Connecting to a Computer, page 27,
before proceeding.
2) Press the ON/OFF key to power up the MMX-6 DL.
3) Press the MEM key to activate the data logging functions and
settings.
4) Press the SEND key to enter file setup.
5) Press the UP / DOWN arrow keys to scroll to the file to be printed (
F-01, F-05, etc. ).
6) Press SEND, once again, to select the file to be printed. The display
will flash the FILE / F-05 ( The file selected ) symbol.
7) Press the UP / DOWN arrow keys to scroll to the flashing Prnt / F-
05 ( The file chosen ), or LISt (tape printer) symbol.
8) Press the SEND key to print the contents of the file.
9) Press the MEM key, at any time, to exit the data logging functions
and return to measurement mode.