Dakota Ultrasonics MMX-6DL - Manual (Page 29)

MMX-6 DL Ultrasonic Thickness Gauge
25
Using the Beeper
1) Press ON/OFF key to power up the unit.
2) Press MODE key to activate features and settings.
3) Press the UP or DOWN arrow keys to scroll to bEEP.
4) Press the SEND key to toggle the status of the beeper on/off.
5) Press the MODE key once again to return to measurement mode.
Alarm Mode
1) Press ON/OFF key to power up the MMX-6 DL.
2) Press the MODE key to activate features and settings.
3) Press the UP / Down arrow keys to scroll to the ALAr symbol.
4) Press send key to toggle ALAr status on/off.
5) Status ON - A nominal value will be displayed with the units IN/MM
flashing.
6) Press the UP or DOWN arrow keys to scroll to the desired nominal
thickness value.
7) Press the SEND key to select the desired nominal value and return
to mode menu.
8) Press the MODE key once again to return to measurement mode.