Comelit FT SB 08 INT - Manual (Page 12)

Group S.p.A.
FT SB 08 12
E
N
WELCOME MESSAGE
INFO
ESC SCROLL
ESC
X
CONFIRM
_
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
LINGUA 2
SCREENSAVER
AZZERA
AZZERA
IN CORSO...
LANGUAGE 2
SCREENSAVER
CLEAR
CLEAR
MEMORY...
Select the
CLEAR/
SETTINGS menu.
Configuration mode has
been accessed (see point 3
in FT SB 08, page 20).
14) Restoring FACTORY SETTINGS
This function can be used to restore the default settings:
Call mode
➞ Simplebus standard Language ➞ Italian (default)
Language 2 ➞ deactivated Name only ➞ deactivated
Screensaver ➞ deactivated Welcome message ➞ deleted
Download ➞ RS232 Address485 ➞ 0
CORRIGENDA
PAGE 3
Introduction
The Comelit digital call module Art. 3340 can be used in Simplebus type systems, and is
fitted with a name directory to store a list of user names as well as an alphanumerical
keypad to call the door-entry phone users by entering the code which identifies them.
The main characteristics are as follows:
• Memory capacity: 1000 names of 18 alphanumerical characters.
• Graphic display with 128x64 dots/pitch resolution.
• 6 call operating modes (see “9.2) Setting the CALL MODE”, page 14):
Simplebus - standard call mode (default), Simplebus Top - standard call mode, Indirect
code call mode (for Simplebus and Simplebus Top), Alphanumeric call mode, Immotec
standard call mode, Immotec indirect call mode.
• Entering the name list (Download) by means of programmer Art.1230 or by means of
connection with a PC equipped with software Art.1249/A.
Press the key to
confirm the selection.
A screen will appear,
displaying the keys to be
used
for message
management.
Select the
WELCOME MESSAGE
menu.
= to move the cursor
around the display.
X= to delete a character.
= to confirm entry of the
welcome message.
= to exit the menu
without saving the message
entered.
Enter the message.
To confirm entry of the
welcome message, press
or .
To exit the menu without
saving
the message
entered, press .
DEACTIVATING the “WELCOME MESSAGE” function
If you wish to cancel the welcome message altogether, delete all the message characters
using the X key. To confirm cancellation of the welcome message, press . To exit the
menu without saving the message cancellation, press .
DISPLAY DESCRIPTION OPERATION
DISPLAY DESCRIPTION OPERATION