Comelit FT SB 08 INT - Manual (Page 11)

FT SB 08
11 FT SB 08
E
N
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
*SCREENSAVER
ESC
CONFIRM
ONLY NAME
LANGUAGE 2
SCREENSAVER
SCREENSAVER
ESC
*CONFIRM
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
CALL OPERATING
ONLY NAME
LANGUAGE 2
*ONLY NAME
ESC
CONFIRM
ONLY NAME
ESC
*CONFIRM
*ONLY NAME
ESC
CONFIRM
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
DISPLAY DESCRIPTION OPERATION
13) Setting the WELCOME MESSAGE
This function can be used to enter a welcome message which is MAX 40 characters long,
covering 4 lines in block capitals.
The welcome message alternates with the normal information screens every 4 seconds.
CAUTION! If the “LANGUAGE 2” function is active, the message cannot under any
circumstances be switched to the second language (see point 4C “Setting LANGUAGE
2”, page 10).
Press the key to
confirm the selection.
Select the
ONLY NAME/
SETTINGS menu.
Select “CONFIRM” to
activate the function or
“ESC” to deactivate the
function using the
keys.
Press the key to
confirm the selection.
8L) Setting NAME ONLY
This function is deactivated by default.
When scrolling and during a call from a user, this option allows only the name to be
displayed, without the indirect code.
4D) Activating the SCREENSAVER
This function is deactivated by default.
If activated, the screensaver will appear after a 30-second standby period.
Configuration mode has been
accessed (see point 3 in FT
SB 08, page 20).
Press the key to
confirm the selection.
Select the
SCREENSAVER/
SETTINGS menu.
Select “CONFIRM” to
activate the function or
“ESC” to deactivate the
function using the
keys. Press
to confirm
the selection.
DISPLAY DESCRIPTION OPERATION
DISPLAY DESCRIPTION OPERATION
Configuration mode has
been accessed (see point 3
in FT SB 08, page 20).
ACTIVATING OR DEACTIVATING the “ONLY NAME” function
DISPLAY DESCRIPTION OPERATION
Configuration mode has
been accessed (see point 3
in FT SB 08, page 20).
ACTIVATING the “WELCOME MESSAGE” function