Cpu installation – chiliGREEN P4VTB User Manual
Page 8
5
4. CPU Installation
Step1:
Pull the lever sideways away from the socket and then raise the lever up to a
90-degree angle.
Step2:
Look for the white dot/cut edge. The white dot/cut edge should point towards the
lever pivot. The CPU will fit only in the correct orientation.
Step3:
Hold the CPU down firmly, and then close the lever.
Step4:
Put the CPU fan on the CPU and buckle it. Connect the CPU fan power cable to
the JCFAN1. This completes the installation.
CPU Fan Headers: JCFAN1
Pin No.
Assignment
1
Ground
2
+12V
1
3
JCFAN1
3
FAN rpm Rate Sense
System Fan Headers: JSFAN1
Pin No.
Assignment
1
Ground
2
+12V
1
3
JSFAN1
3
FAN rpm Rate Sense
Step1 Step2 Step3 Step4