chiliGREEN C5500Q - Manual (Page 131)

Modules & Options
7 - 24 3.75G/HSPA Module
7
12. If you click the Mobile Partner close icon a message will be displayed asking
you to click OK to confirm the program exit and to terminate the connection.
13. Exiting the program terminates the connection, but DOES NOT turn off the 3.75G/
HSPA module, and you will need to press the Fn + key combination to turn off
the module (pay careful attention to this aboard aircraft - see “Wireless Device
Operation Aboard Aircraft” on page 7 - 19 ).
14. If the module is on and the computer enters a power-saving state, then the power
status of the module on resuming from the power-saving state will be as below:
• If the 3.75G/HSPA module is on and the computer is Shut Down or Restarted;
the module will be off when the computer starts up.
• If the 3.75G/HSPA module is on and the computer enters Sleep or Hibernate;
the module will be off when the computer resumes from sleep.
Figure 7 - 16
Exit Prompt