chiliGREEN T5110 - Manual (Page 122)

Modules & Options
7 - 2 Bluetooth Module
7
Bluetooth Module
The operating system’s Bluetooth Devices control panel is used to configure the
Bluetooth settings in Windows, and therefore does not require a driver. Use the Fn
+ F12 key combination (see
“Function/Hot Key Indicators” on page 1 - 10 ) to
toggle power to the Bluetooth module. When the Bluetooth module is powered on,
the
LED will be orange and the on-screen indicator will briefly be
displayed.

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F12 key com-
bination to toggle power to
the Bluetooth module, and
check the LED indicator to
see if the module is pow-
ered on or not (see
Table 1
- 5, on page 1 - 10 / Table 1
- 3, on page 1 - 7 ).

Bluetooth Data Transfer
Note that the transfer of data between the computer and a Bluetooth enabled device is sup-
ported in one direction only (simultaneous data transfer is not supported). Therefore
if you are copying a file from your computer to a Bluetooth enabled device, you will not be
able to copy a file from the Bluetooth enabled device to your computer until the file transfer
process from the computer has been completed.
Bluetooth Module & Resuming From Sleep Mode
The Bluetooth module’s default state will be off after resuming from the Sleep power-saving
state. Use the key combination (Fn + F12) to power on the Bluetooth module after the com-
puter resumes from Sleep.