Caron 6241 User Manual
Page 30
6200 series Operations Manual
Rev D 2/14/2012
Page 30 of 60
SECTION 6 – ACCESSORY OPERATION
Using the Carboy Water System (BOTL301)
To fill the carboy while attached to the chamber, unscrew the cap. Fill carboy with
distilled or deionized water (see Connecting the Water Supply section for details). The
carboy holds 2.5 liters.
If the carboy must be removed in order to fill it up, first disconnect the tubing between
the carboy and chamber by pressing the metal lever at the tubing connects /
disconnects at the bottom of the carboy. Then unscrew the four mounting screws and
remove the carboy. After re-attaching the carboy, connect the tubing by simply
pressing the plastic fittings into each other.
Screw Cap
Tubing Connects/
Disconnect to
Carboy
Mounting Screws
(4 total)
Tubing To
Chamber