Caron 6241 - Manual (Page 24)

6200 series Operations Manual Rev D 2/14/2012 Page 24 of 60
Changing the Humidity Set-point (6220 & 6240 only)
To set the humidity set-point, press the UP arrow to increase the humidity set-point by
1% RH. Press the DOWN arrow to decrease the humidity set-point by 1% RH.
Pressing and holding either button will cause the set-point to scroll rapidly in either
direction.
If humidity is not required in the chamber, the RH system can be disabled by turning off
the Enable Humidity switch. This will disable the entire RH system including the
controller. The system can be turned back on at anytime.
To turn off the humidity control system, but still display the chamber humidity level,
press the EZ button. The words “OFF” will display in the set-point area. To toggle
back to controlled humidity, press the EZ button again.
Humidity
Set-point
Actual
Humidity
Increase
Humidity
Set-point
Decrease
Humidity
Set-point
Enable Humidity
Control Switch
EZ Button