Carbolite ABF 8/28 - Manual (Page 8)

8 MF58 – 1.06
Do not open the furnace door during an ashing procedure as combustion will be taking place
within the chamber.
3.2 Temperature Control
Main controller Eurotherm 3216 P1 max temp 800°C. See separate manual.
Afterburner controller Eurotherm 2132 max temp 950°C. See separate manual.
Element over-temperature controller 2132. This controller is mounted inside the furnace, and
has a set temperature of 900°C. This controller automatically switches off the elements when the
element chamber gets to hot, and then switches back on. The element over-temperature
controller is fitted as additional protecting for the heating elements. This over-temperature is self
resetting and should not need any user adjustment. It is access by removing the back panel – see
photo 3.5 below:
Photo 3.5
Element over
temperature
controller