Carbolite GPC Series - Manual (Page 16)

Carbolite, Parsons Lane, Hope,
Hope Valley, S33 6RB, England.
Telephone: +44 (0)1433 620011
Fax: +44 (0)1433 621198
E-mail: [email protected]
The products covered in this manual are only a small part of the wide range of
ovens, chamber furnaces and tube furnaces manufactured by Carbolite for
laboratory and industrial use. For further details of our standard or custom built
products please contact us at the address below, or ask your nearest stockist.
Copyright © 2014 Carbolite Limited
For preventive maintenance, repair and calibration of all Furnace
and Oven products, please contact:
Carbolite Engineering Services
Telephone: +44 (0)1433 624242
Fax: +44 (0)1433 624243
Email: [email protected]
MF04 – 3.29 14/08/14
9.0 S PECIFICATIONS
Carbolite reserves the right to change specifications without notice .
9.1 Models Covered by this Manual
MODEL Max.
Temp.
Max.
Power
Chamber Size (mm) Approx.
Capacity
Net
Weight
(°C) (kW) H W D (l) (kg)
Chamber furnaces heated by resistance wire resting on refractory formers.
GPC 12/36 1200°C 9 250 320 450 36 100
GPC 12/65 1200°C 14 280 390 595 65 165
GPC 12/131 1200°C 18 350 500 700 131 400
GPC 12/200 1200°C 24 400 500 900 198
GPC 13/36 1300°C 9 250 320 450 36 100
GPC 13/65 1300°C 14 280 390 595 65 165
GPC 13/131 1300°C 18 350 500 700 131 400
9.2 Environment
The furnaces contain electrical parts and should be stored and used in indoor conditions as
follows:
temperature: 5°C - 40°C
relative humidity: maximum 80% up to 31°C decreasing linearly to 50% at 40°C