Carbolite GP Series User Manual
Page 13
GP Ovens
MF17 3.07
13
7.4 Three phase without Neutral (star – e.g. 380-415V)
The circuit is similar to 7.4, but the “neutral” ends of the
elements are not connected to a neutral terminal block.
The control circuit contains an isolating transformer to reduce
the control voltage to 240V or similar.
7.5 Higher Voltages (e.g.254V)
The control circuit contains an isolating transformer to reduce
the control voltage to 240V or similar.
7.6 Stoving & Curing
The following addition is made to the circuit.
F2
F2
Transformer
Instrument Switch
control circuit
Fan Motor
exhaust Fan
Fault light
COIL
Pressure
Switch
o/temp if
fitted
element circuit
Relay or Contactor
See also other documents in the category Carbolite Kiln:
- Peak Series (16 pages)
- AX30 (12 pages)
- GPC Series (16 pages)
- LHT Series (16 pages)
- HRF (MF05) (16 pages)
- HRF 7/45 (12 pages)
- ABA 7/35B (72 pages)
- TLD Series (12 pages)
- CR Series (16 pages)
- MTT 12/38/850 (16 pages)
- CF 15 - CF 60 (20 pages)
- PTC 12/20/150 (16 pages)
- CFM Series (16 pages)
- AAF Series (16 pages)
- SNF Series (12 pages)
- HZS Series (16 pages)
- Work Tube End Seals (12 pages)
- MTF Series (16 pages)
- TZF Series (16 pages)
- GHA Series (24 pages)
- TZF Series (16 pages)
- STF Series (20 pages)
- EHA Series (28 pages)
- CWF Series (16 pages)
- ABF 8/28 (16 pages)
- VCF Series (16 pages)
- ELF Series (16 pages)
- HTR 11/75 (16 pages)
- HST Series (16 pages)
- STF Series (20 pages)
- VST 17/-- (16 pages)
- BLF 17/3 (16 pages)
- RHF Series (17 pages)
- HTF 17 (20 pages)
- RHF Series 3 litre - 35 litre (16 pages)
- CDF 15/1b (16 pages)
- CAF 16/38 (16 pages)
- CAF DIGITAL IMAGING (52 pages)