C.B.S. Scientific MGV-216-33 - Manual (Page 5)

C.B.S. œ Scientific Double & Triple Wide Mini-Vertical 5
SECTION 1
General Information
1.1 Introduction
The C.B.S. Scientific Double and Triple Wide Mini-Vertical Gel systems are available in four
models: the Dual units, Cat# MGV-202-20 (20cm(w) x 10cm(l), Cat. # MGV-202-33 (33cm (w) x
10cm (h)) and Cat.# MGV-216-33 (33cm(w) x 16cm(l))and the Single unit, Cat. # MGV-102-33
(33cm (w) x 10cm (l)). All are designed for rapid, high throughput screening by SDS- PAGE, 2-D
gel, short path length sequencing or agarose gel separations. In addition, non-radioactive
labeling with fluorescent probes in conjunction with phosphorimaging and fluorimaging systems
can be facilitated by the use of optional low-fluorescent glass plate sets. An internal cooling
chamber for precise temperature control is standard with the Dual units. The unique short path-
length design with extra-wide sample load area provides savings by using less expensive
reagents while allowing rapid screen analysis of the gels ensures lower amounts of expensive
reagents and rapid analysis.
Gel casting can be facilitated by using our convenient and unique Gel Wrap
™, or by conventional
pouring methods.
1.2 Specifications
Constructions:
Buffer chamber, safety cover Acrylic
Electrodes Platinum wire .012" diameter
Power cords FR Urethane rated 7500VDC,
200mA, 65
°C
Combs Polycarbonate, Teflon, Mylar, White
Glass plates Soda-lime float glass or low
fluorescence
Spacers Polycarbonate, Mylar or PVC
Clamps Polypropylene, stainless steel
Safety Certification EN61010-1-1993 (IEC1010-1)
Table 1
Specifications
MGV-202-20 MGV-102-33 MGV-202-33 MGV-216-33
Shipping
Weight 6 lbs 7 lbs 11 lbs 13 lbs
Overall Size
(l)x(w)x(h) cm 31 x 18 x 13 45 x 14 x 12 45 x 19 x 12 45 x 19 x 18
Recommended
buffer volume
upper reservoir
lower reservoir
140ml
250ml 240ml
200ml 250ml
400ml 250ml
400ml
Distance
between
electrodes -cm 10cm 10cm 10cm 16cm
Voltage limit 250VDC 250VDC 250VDC 700VDC