C.B.S. Scientific MGV-216-33 - Manual (Page 12)

C.B.S. œ Scientific Double & Triple Wide Mini-Vertical 12
4. Connect the leads to the power supply, matching the color-coded red to red and
black to black. See Section 4.1 for recommended power conditions. Begin
separation by electrophoresis.
3.5 Removing the Gel
1. Turn the power supply off and disconnect the leads from the power supply. Remove
the safety cover from the unit, by placing thumbs on white posts next to red & black
connectors, then pushing down while pulling up with fingers under lid. DO NOT pull
on power cords.
2. Detach side clamps and drain upper buffer into lower chamber. Remove gel
sandwich and carefully separate making sure that the gel remains attached to one
plate. Stain and fix according to your preferred method.