Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 37

7. Function Mode.

Initial setting and calibration in using the SBC or MMD

Example of Source Selection

Source: Boost

Source: Speed

Source: Temp Source: AUX

Example of Meter Warning

Advice:
The needle center will blink red when both the warning source screen and the meter screen are
the same. However, it will alert by a source pop up and a buzzer when the warning source and
the meter are not the same. At the same time, the blue circles at the bottom corners will turn
red.

Example of Digital Warning

①

Warning

Warning Supervision

To Do

Not To Do

Buzzer

Alert

Not Alert

Direction of Supervision

OVER

UNDER

Set Value

Depends on the input source

Advice:
The direction of supervision of the boost is fixed to OVER.
A limiter selection window will pop up when the boost-warning switch is selected.
The limiter function will take effect when the boost-warning switch is turned ON.

Advice:
At the Dual Digital Meter, the warning source will pop up
at the bottom of the screen.

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes