Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 15

Piping methods to the Sequential Valve Unit.

Actuator (Swing Valve) Type.

1. Make sure the valve type is set as actuator type (AC) at the controller’s function

menu.

2. Cut the actuator’s hose and connect it to the OUT line of the solenoid valve

unit.

3. Cut the turbo’s hose and connect it to the IN line of the solenoid valve unit.

Single Turbo:

Twin Turbo:

Connect to the
IN of the Valve

Connect to the
OUT of the Valve

Actuator

Cut

Actuat

Connect to the
IN of the Valve

Connect to the
OUT of the Valve

Three Way

Remove the
stock

i i

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes