Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 16

A Solenoid valve control systems that are common on Nissan and Mitsubishi
vehicles.
Please remove and plug the hosing that goes to the Solenoid valve, or return it to the
suction pipe, but in some cases plug the suction pipe itself.

Actuator.

Remove this part

and plug it.

To the stock

solenoid valve.

TURBO CHARGER.

A two-mode control systems that are common on Toyota vehicles.
Please remove the hose that goes to the Solenoid valve and plug both the actuator and
the solenoid side.
Please do not remove the connector to the solenoid valve. There are vehicles that the
engine check lamp might turn on.

Actuator

To the stock

solenoid valve.

Cut this part

and plug it.

TURBO CHARGER

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes