Online manual not for resale purposes – BLITZ SBC i-D III User Manual

Page 7

WARNING SCRAMBLE

- The Blitz SBC I-D incorporates an advanced warning and limiter

- Scramble boost allows the user to set an increase or decrease

function The function allows the user to preset warning and preset

amount of boost for a desired time

function. The function allows the user to preset warning and preset

amount of boost for a desired time.

the amount of boost reduction.

1 To set, press MENU button, scroll down to SCRAMBLE and press

1 To set, press MENU button, scroll down to WARNING and press

enter to select.

2 To select function, scroll down and press enter.

The function will be highlighted, scroll to select or set

different setting.

SCRAMBLE

WARNING

TIME [ SEC ]

OFF

WARNING

CHANNEL

CH4

WARNING

CHANNEL

CH4

BUZZER

BOOST

1.0

LIMITER

TIME

WARNING

- Scramble boost operates by TIME (seconds); if left off, scramble

- Allows the user to turn warning on or off. Buzzer and

boost will not operate.

Limiter will not work unless warning function is on

- Time is set from 1-99 seconds

- The LCD backlight will turn red if boost exceeds warning setting

- Scramble boost is operated by throttle response, scramble will

automatically.

BUZZER

- Allows the user to choose to turn buzzer off, the unit will not beep

CHANNEL

if the buzzer function is turned off.

- To set scramble boost pressure, choose a designated channel that is

only going to be use for scramble boost. Set boost pressure as

BOOST

desired.

- To set boost warning level. Can be set in kg/cm

, kpa, BAR and PSI.

Example: Channel 1 is set at 15 psi, and want to set scramble boost

- To set boost warning level. Can be set in kg/cm

, kpa, BAR and PSI.

Example: Channel 1 is set at 15 psi, and want to set scramble boost

at 20 psi. Choose designated channel, in this case use Channel 4,

LIMITER

set to 20 psi. Go to scramble setting and set Time to 3 seconds,

- This function is a boost reduction function. Limiter will turn on

exit Scramble setting and return to Channel 1 display. Drive vehicle

automatically if boost level exceeds the warning setting.

in Channel 1 boost setting, boost will automatically jump to Channel

- Limiter is set in boost ratio

4 (which is set at 20 psi) for 3 seconds, then it will return back to

ex 0 = no boost reduction

Channel 1 This will continued every gear until the scramble boost

ex. 0 = no boost reduction

Channel 1. This will continued every gear until the scramble boost

99 = will reduce boost back to stock

is turn off.

- Recommended setting 7-10

Page 7

Online Manual Not For Resale Purposes