BASELINE Tire Changer - Manual (Page 18)

14 • Important: Always read and follow operating instructions.
Tube Type Tires
Mounting
1. Avoid pinching or forcing the tube.
2. Apply rubber lubricant to the beads of the tire.
3. Mount the bottom bead.
4. Round out the tube with a small amount of air.
5. Apply rubber lubricant to the tube.
6. Insert the tube into the tire.
7. Mount the top bead.
Demounting
1. After tire beads are loosened, lubricate the beads
and rim liberally.
2. Position demount head and bead lifting tool as
described in steps 7 through 10 on pages 3 and 4.
Depress table top pedal and rotate only a short distance
at a time. This allows you to stop the process should the
tube get pinched.
3. After upper bead is demounted, remove tube and
demount lower bead.
Do It Now
Make sure the instruction and warning decal
is clean and clearly visible to operator.
✔