Barranca Diamond MK-145 Tile Saw - Manual (Page 8)

8
MK-145 SAFETY
eleCTRiCal ReQUiReMeNTS aND GROUNDiNG iNSTRUCTiONS
In order to prevent potential electrical shock and injury, the following electrical safety precautions
and symbols should be followed at all times!
In case of a malfunction or breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• Do not modify the plug provided – if it will not fit the outlet; have the proper outlet installed
by a qualified electrician.
• Improper connections of the equipment-grounding conductor can result in a risk of
electric shock. The equipment-grounding conductor is the insulated conductor that has
an outer surface that is green, with or without yellow stripes. If repair or replacement of
the electric cord or plug is necessary, do not connect the equipment-grounding conductor
to a live terminal.
• Check with a qualified electrician or service personnel if the grounding instructions are not
completely understood, or if in doubt as to whether the tool is properly grounded.
• Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole
receptacles that accept the tool’s plug.
• Repair or replace a damaged or worn cord immediately.
This tool is intended for use on a circuit that has an outlet that looks like the one shown in Sketch
A. The tool has a grounding plug that looks like the plug illustrated in Sketch A. A temporary
adapter, which looks like the adapter illustrated in Sketches B and C, may be used to connect this
plug to a 2-pole receptacle as shown in Sketch B, if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet can be installed by a
qualified electrician. The green-colored rigid ear, lug, and the like, extending from the adapter, must
be connected to a permanent ground such as a properly grounded outlet box.
NOTe: Use of a temporary adapter is not permitted in Canada.
WARNING
WARNING