Barranca Diamond MK-145 Tile Saw User Manual

Page 20

Cleanup:

NEVER empty the Cooling Basin with the ON/OFF switch in the ON position, or
when power is applied.

NOTe: DO NOT use solvents or acids when cleaning the MK-145.

During the cleaning process, do not allow water to enter the motor compartment
of the MK-145.

MK-145

CLEANUP

WARNING

(A)

Verify the

ON/OFF switch

is in the

OFF position

(D)

Empty the contents of

the Water Basin (Conform

to Federal, State and

Local laws, codes and

ordinances relative to

environmental protection

if unsure of disposal

requirements)

(B)

Unplug the MK-145 from

the power source and

unplug the MK-145 from

the GCFI

(E)

Clean the MK-145 with clean,

fresh water and dish soap

then rinse with clean water
and dry the MK-145 with a

clean cloth or paper towels

(C)

Lift Water Basin Cover and

pull out on Water Basing

Cover to remove