Barranca Diamond BX-4 BRICK SAW WITH OR WITHOUT MISTING DUST CONTROL - Manual (Page 32)

BX-4 32
MAINTENANCE & TROUBLESHOOTING
3. MOVABLE CUTTING TABLE DOES NOT
MOVE CORRECTLY:
Step A: Check that the Guide Rails (1) are clean. If
dirty, clean the rails. If clean, proceed to Step B.
Step B: Check for Roller Wheel (2) damage. If
damaged, replace the Roller Wheels. If not damaged,
proceed to Step C.
Step C: Verify the correct Blade is being used of
the material. Contact the place of purchase or MK
Diamond (800) 421-5830 for additional assistance.
2
1