Barranca Diamond BX-4 BRICK SAW WITH OR WITHOUT MISTING DUST CONTROL - Manual (Page 22)

BX-4 22
5. ANGLE CUTS CONTINUED:
• Slowly push the masonry work towards the Blade to
begin the cut.
• Continue to push the masonry work into the Blade
until the cut is complete.
• Unlock the Trigger Switch.
• Allow the Blade to stop before removing the work.
CAUTION
SETUP, ADJUSTMENT & OPERATION
DO NOT FORCE TOOL! It will do the job better and safer
at the rate for which it was designed.
Lock
Button