Barranca Diamond BX-4 BRICK SAW WITH OR WITHOUT MISTING DUST CONTROL - Manual (Page 31)

BX-4 31
2. BLADE WILL NOT CUT PROPERLY:
Step A: Check for smoothness or “glazing”. If “glazed,”
dress Blade. See Blade Dressing section. If not
“glazed,” proceed to Step B.
Step B: Check for proper rotation. If rotation is not
correct, reposition the Blade. If rotation is correct,
proceed to Step C.
Step C: Ensure the Blade core is not bent. If core
is bent, change Blade. If core is not bent, proceed to
Step D.
Step D: Verify the correct Blade is being used of
the material. Contact the place of purchase or MK
Diamond (800) 421-5830 for additional assistance.
MAINTENANCE & TROUBLESHOOTING