Serial port commands – Axcess Activator Installation Guide User Manual

Page 15

Activator Installation Manual

750.001.006 R0003

Serial Port Commands

There are commands available to list a help screen and change

the baud rate of the Activator’s serial port.

Receiving Help
Typing a question mark “

?” displays a help screen listing all

commands available for the Activator:

c = 4800cps

d = 9600cps

e = 19200cps

! = ID

Changing the Baud Rate
To connect the Activator to another serial device, you can

change the Activator’s baud rate to match the baud rate of the

device by entering one of the following commands:

Baud Rate Command

4800

9600

19200

(Default baud rate)

NOTE

After you have set the baud rate, you will need to adjust the

port settings of the serial device.