Autoquip AUTO-TILT PORTABLE TILTER - Manual (Page 20)

20
Oil Viscosity Recommendations
Environment
(Ambient Temperatures)
Recommended Oil
Indoor location, variable
temperatures (30° - 100° F) 10W30 or 10W40
Multiviscosity motor oil
Indoor location, consistent
temperatures (60° - 80° F) SAE-20W motor oil
Outdoor location, (30° - 120° F) 10W30 or 10W40
Multiviscosity motor oil
Outdoor location, (-10° - 120° F) SAE 5W20 or SAE 5W30
Multiviscosity motor oil
Cold-storage warehouse (10° - 40° F) 10W Multiviscosity motor oil
Freezer (-40° F to 0° F) Consult Factory
NOTE: all are detergent type oils.
PIPE THREAD SEALANT
Loctite PST #567 pipe thread sealant or equivalent is recommended. Do not use Teflon
tape. Tape fragments can cause malfunctioning of the hydraulic system.
POWER UNIT
Electric (DC) Standard
• 12 volt battery operated
• Internal power unit
Electric (AC)
• 115/60 single phase _ hp “super-torque” motor
• Full load AMP draw - 16.6
• Fuse size – 45 AMPs
• Circuit breaker – 40 AMPs
ROUTINE MAINTENANCE