Autoquip SERIES 35 POWERED TURNTABLE - Manual (Page 16)

16
P
owered turntables normally will require very little maintenance. However, a routine
maintenance program could prevent costly replacement of parts and/or downtime.
DYNAMIC INSPECTION (Turntable running)
1.
Check any unusual noise when it occurs. Determine the source and correct as
necessary.
2.
Check for chain tightness and lubricate every 90 days.
DANGER!
HIGH VOLTAGE!! Disconnect and/or lock out the electrical supply to the power
unit prior to any maintenance being performed.
ROUTINE STATIC INSPECTION
1. Check for unusual wear on the rollers. Make sure they are free to rotate and that
there is desirable clearance between the rollers and the platform.
2.
Check that all retaining pins are in place and secure.
3.
Check for broken or cracked welds.
4.
Check that all anchors are in place and secure.
5.
Check that the chain connections are secure and that all keepers are in place.
6.
Check that all enclosures are tight and secure.
7.
Check the reducer oil level and add appropriate oil when needed.
ROUTINE MAINTENANCE