Aquascape PRO-Fit PondSweep Skimmers (00250 & 00900) - Manual (Page 9)

9
Fig. Drape the liner over the front of the skimmer and attach it using the spring
clips and check that the liner is smooth across the face of the skimmer.
Fig. 5 Cut the liner even with all four sides of the opening in the skimmer vault.
Fig. 6 Pass the bellows flange through the opening from the inside, placing it on
top of the liner and between the liner and the frame.
Fig. 7 Tighten all screws to spread the silicone and seal the liner to the vault.
Add Rock and Gravel
STEP 7
• You can expect to use several tons
of stone and gravel for your water
feature. Talk to your dealer for
help choosing the quantity and
sizes of stone and gravel.
Rocking in the Pond
• Start from the bottom and set the
largest character boulders first
against the vertical walls; then
stack the smaller boulders on top.
(See fig. 8)
• Be careful when placing any
large boulders so you don’t
damage the liner.
• The opening on the front of the
skimmer can be hidden by plac-
ing boulders on either side and
bridging a stone across, creating
a cave effect.
Note: Make sure the boulders do not
block the water flow into the skimmer.
Fig. 8 Starting at the bottom, set the largest character boulders first then fill in
with the smaller ones.