Aquascape PRO-Fit PondSweep Skimmers (00250 & 00900) User Manual
Page 7
7
Fig. 15 Install the top screw on the other side and then repeat with the rest of
the screws.
Fig. 16 With all of the screws started, cut the liner using the inside of the “U” frame
as a guide.
Fig. 17 Tighten the screws squishing out the silicone along the edge of “U frame.
Fig. 18 Apply a 2nd bead of silicone to the inside edge of frame and smooth out with
your finger.
Fig. 19 Insert the ratchet fasteners into bellows from the outside of flap.
Fig. 0 Pull the bellows flap through the skimmer opening and secure to the
skimmer with the fasteners.