APG PWS Paddle Wheel user manual - Manual (Page 8)

PWS Series Rev. A1, 4/07
8
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
PWS-Z Series (PWS-Z and PWS7-ZL)
Wiring should be in accordance with all local codes.
Control cable from 0.5 mm
2 to 3.5 mm 2 is recommended.
Contact Capacity (Resistive)
250 V 3 A AC
30 V 4 A DC
Power Consumption 1.5 VA
NOTES:
1. The earth ground terminal is grounded to the housing.
2. The cable entry must be properly fi tted to preserve IP65 after wiring.
CAUTION: Make sure the supplying voltage and the wire color matches. The
wrong voltage or miswiring may damage the sensor.
WARNING: To avoid personal injury, DO NOT remove the housing cover
when power is applied.