APG PWS Paddle Wheel user manual - Manual (Page 7)

Rev. A1, 4/07 PWS Series
7
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• Paddle Variety and Dimensions
The polycarbonate four vane is designed for general use on bulk density
as low as 0.3 g/cm 3 (18.7 lb./cu. ft.). Use at high and low level, top and side
mounting.
Stainless steel paddles, 304SS or 316SS, are available in one or two vane.
One vane version designed for general use on side mounting. It is suitable
for high density as 2.0 g/cm 3 (12.5 lb./cu. ft.). Especially suitable for use in high
operating temperature, model PWS-T.
Special two vane is designed for use at top or side mounting on very light
materials less the 0.02 g/cm 3 (1.25 lb./cu. ft.).