Anchor CENTURY 80 WIDE - Manual (Page 8)

3 LACING INSTRUCTIONS
With tent sections on ground, overlap center
pole holes with grommet side on top.
Lace between center pole holes first. Push
first loop up through corresponding grommet.
Continue, passing each loop through a grommet
and the preceding loop.
Continue lacing process and cover lacing with
protective double rain flap by velcroing the short
flap first, then snapping the top flap to the rope
as you move toward the other center pole hole.
Tie off last long loop.
LACE LOOP SNAP
CENTER POLE HOLES
FLAP
RING
Then lace from center pole to eave on both
sides of tent. Tie off last long loop. Align
plates and attach hook to plates on inside of
tent, as shown.
MIDDLE
END
CENTER POLE
HOLE
END
FLAP
LACE ROPE
HOOK
PLATE JUMP ROPE
WALL ROPE
SNAP
LAST
LACING
LOOP
POLE HOLE
RING
VIEW FROM OUTSIDE
VIEW
FROM
INSIDE
2 LAYOUT AT SITE
Drive stakes at points located. Each 2’ stake
bar requires 3 stakes. A 4’ stake bar requires
6 stakes.
Spread drop cloths and unroll tent.
Any objects with sharp projections which must
remain on site under the tent should be padded
and taped.
NOTE: Both Loop side and hole side of sec-
tions are required for proper lace.
LACE
STAKE BARS
END
MIDDLE
END
8
SEE WEB GUY LAYOUTS FOR
STAKING CONFIGURATIONS.