Fixed color mode, Locked mode, Lighting – Altman Lighting Chalice User Manual
Page 12
Lighting
BRINGING IMAGINATION TO LIGHT
Lighting
BRINGING IMAGINATION TO LIGHT
M a n u a l
I N S T A L L A T I O N & O P E R A T I O N
Chalice Series
57 Alexander St., Yonkers, NY 10701
Tel: 914-476-7987
Visit our website at www.altmanlighting.com
© 2012 Altman Stage Lighting, Inc.
12
FIXED COLOR MODE:
This is a special mode that allows you to manually select colors for a single unit using the 3 keys. (Also see
DMX Mode on page 6.)
To enter Fixed Color Mode (or exit to DMX Mode) :
Wait a few seconds until the display goes blank,
1. press and hold the [ ONES ] button
2. press and hold the [ TENS ] button
3. release the [ ONES ] button
4. release the [ TENS ] button
While in Fixed Color Mode, the hundreds button cycles through 'r', 'G', 'b', and 'A' colors . The tens and ones
digits select 0-99 values. Level 99 is that channel at full.
Locked Mode:
To Lock (or unlock) the buttons:
Wait a few seconds until the display goes blank,
1. press and hold the [ ONES ] button
2. press and hold the [ HUNDREDS ] button
3. release the [ ONES ] button
4. release the [ HUNDREDS ] button.
Display will show
Loc
for a moment and then blink. Buttons will ave no eff ect until they are unlocked.