Altman Lighting Spectra Series - Manual (Page 15)

Lighting
BRINGING IMAGINATION TO LIGHT
Lighting
BRINGING IMAGINATION TO LIGHT
M a n u a l O P E R A T I O N
Spectra Series
57 Alexander St., Yonkers, NY 10701 Tel: 914-476-7987 Visit our website at www.altmanlighting.com
© 2012 Altman Stage Lighting, Inc.
15
Select DMX start address
• This is the start address of the fi rst output of the fi xture.
• Total amount of addresses per fi xture depends on fi xture
confi guration and number of cells.
• Default address is 1.
Select network resolution:
• Change between 8 and 16 bit resolution.
• Using 16 bit gives you 2 addresses per output: Address 1 - Coarse,
Address 2 - Fine.
Interpolation modes:
To get the mose optimized dimming performance for diff erent
applications. Default is COLR.
Select Show:
Select one of the pre-programmed shows
• 1 - Static, all outputs 100%
• 2 - Static, R 100%
• 3 - Static, G 100%
• 4 - Static, B 100%
• 5 - Static, A 100%
• 6 - RGB color change
• 7- RGBA color change
• 8 - RGB+A color shift
• 9 - All outputs off
Default is show 1
Set speed:
• Set the show speed between -99 and 99.
• Default is 0
Enable Chase mode:
• Selects the show chasing mode for more dynamic eff ects.
• Default is OFF
DMX Mode parameter selection
SHOW Mode parameter selection
Confi guration of the operation of the Spectra Strip while in DMX mode, responding to a DMX control signal.
Confi guration of fi xture operation while operating as a Stand-alone fi xture or Master fi xture.
While in DMX MODE
DMX ADDR
SHOW
NETWRES
SPD
INTERPOL
CHAS
- +
- +
- +
- +
- +
- +
M
M
M
M
M
M
0 » 512
1 » 9
-99 » 99
8 bit
16 bit
OFF
VID
COLR
WHIT
GLOW
OFF
ON
Display off
Display off
M
M
While in SHOW MODE