Allworx 9202E Phones - Manual (Page 19)

Allworx Phone Model 9202E User Guide
+1 866 ALLWORX * +1 585 421 3850 Page 13
www.allworx.com
Revised: 5/21/14
4 Operation
4.1 Place a Call
To place an outbound call, lift the handset or press the SPEAKER button. Dial the extension or
press the SpDial soft key to automatically dial a programmed number. The phone configuration
enables users to dial without lifting the handset or pressing a button. Dialing automatically
activates the speaker phone or headset.
4.2 Receive a Call
For incoming calls, the audible indicator rings and a Call Appearance flashes, unless configured
otherwise. Lift the handset, press the SPEAKER button, or press the flashing Call Appearance
to answer the call.
4.3 End a Call
• Place the receiver on the hook. If using the speaker phone or headset, press the
SPEAKER button.
• Press another Call Appearance. If a second incoming call is on another Call
Appearance, pressing that Call Appearance ends the current call and answers the
incoming call (unless the phone configuration enables auto on hold).
4.4 Headset
Press the SPEAKER button to activate the headset, and then press the SPEAKER button again
to disconnect the call.
4.5 Directory Dialing
1. Press the UP / DOWN scroll soft keys to view a list of all User Extensions, System
Extensions, and Speed Dial numbers by Name or Description.