Allen&Heath XONE DB4 - Manual (Page 14)

Allen & Heath 14 XONE:DB4 User Guide
MASTER SECTION
HEADPHONES OUTPUTS
Stereo 1/4” TRS jack and 3.5mm mini-jack. Plug in good
quality stereo headphones intended for DJ monitoring.
Use closed-ear headphones that provide maximum
acoustic isolation when cueing your sources. We
recommend that you use high quality headphones rated
between 30 to 100 ohms impedance. 8 ohm headphones
are not recommended as their very low impedance may
cause damage to the headphone amplifier.
7
CHANNEL FADER CURVE SELECT
Sets the response of the Channel Up faders. Choose a
setting that best suits the style of music you play.
8
7
8
9
CROSSFADER CURVE SELECT
Sets the response of the Crossfader curve, from dipped,
dipless, and fast-cut, better suited to scratching.
9