Mac driver installation – Allen&Heath XONE DB2 User Manual
Page 33
Allen & Heath
XONE:DB2 User Guide
33
AP8640_2
MAC DRIVER INSTALLATION
Checking the Driver Installation
Once the driver installation is complete, you will need to check that the XONE:DB2 is being
recognised. To do this, connect the XONE:DB2 to your Mac and then, from the file menu, select:
GO Utilities Audio MIDI Setup
The Audio Devices window will open automatically. To open the MIDI Studio window, from
the File Menu, select:
Window Show MIDI Window
In the Audio Input section, the
number of channels should be seen
as 8, running at 48kHz, 24 bit.
In the Audio Output section, the
number of channels should be seen
as 8, running at 48kHz, 24 bit.
Now select the MIDI Devices tab
and
make
sure
that
the
XONE:DB2 is seen as a MIDI
device as shown.