Allen&Heath XONE DB2 - Manual (Page 19)

Allen & Heath XONE:DB2 User Guide 19
AP8640_2
SETUP MENU - EQ AND CROSSFADER
The front page of the setup menu displays the setup
options for the EQ and crossfader.
To enter the setup menu; press the MENU button, then
use the ‘SEL/ADJ’ encoder to scroll up or down between
‘EQ SETUP’ and ‘XFADER SETUP’.
To return to the front screen, select EXIT, or press the
MENU button again.
The mode of the EQ can be set to Isolator, EQ or
Filter using the EQ Setup menu. This is a global setup
and so applies to the EQ controls on all channels.
For more information on the Trimodal EQ system please
refer to Page 13.
Select Back to return to the top Menu screen.
The crossfader setup sets the response of the crossfader
curve between dipped, dipless and fast-cut, better suited
to scratching.
It is also possible to turn the crossfader off from this
screen. If the crossfader is set to ‘Off’, the MENU LED
will illuminate if the crossfader is moved.
EQ SETUP
XFADER SETUP