Allen&Heath XONE DB2 - Manual (Page 12)

Allen & Heath XONE:DB2 User Guide 12
AP8640_2
THE INPUT MATRIX
Each music channel on the XONE:DB2 features an input matrix system, making it possible to select from
any of the ten available sources no matter which input socket they are physically connected to.
Each channel can accept inputs in three formats:
ANALOGUE
Channel 1 - Line only
Channel 2 - Line or Phono (Selector switch on rear panel)
Channel 3 - Line or Phono (Selector switch on rear panel)
Channel 4 - Line only
USB
Channel 1 - ASIO Soundcard Output 1-2
Channel 2 - ASIO Soundcard Output 3-4
Channel 3 - ASIO Soundcard Output 5-6
Channel 4 - ASIO Soundcard Output 7-8
DIGITAL
S/PDIF Input 1 and 2 via RCA on rear panel.
Example Usage
Using the matrix, a CD player plugged into Analogue Input 4 of your mixer can be routed to Channel 1
by setting the Toggle Switch to ‘ANA’ and the Input Select Rotary to ‘4’, or can be assigned to all four
channels simultaneously by repeating the process on all input channels.
Alternatively, if you wish to select your source to be DAW Soundcard Outputs 5-6, set the Toggle
Switch to ’USB’ and the Input Select Rotary to ’3’.
NOTE: When “DIG” is selected, only the first two LEDs will light. Rotating the input select rotary past 2
will leave 2 selected and have no other effect.
1
2
INPUT SELECTION
Turn the 4-position rotary switch to select one of
the four available input sources.
The green LED will illuminate to show which is the
currently selected source.
INPUT SOURCE SELECT SWITCH
Toggle switch allowing selection between Analogue
(ANA), USB and DIGITAL (DIG) sources.