Allen&Heath ICE-16D - Manual (Page 34)

Allen & Heath 34 ICE-16D User Guide
Operating Levels
Input
Mono input on 8 channel 25 pin D Sub sockets. +4dBu nominal (+26dBu maximum)
Output
Mono output on 8 channel 25 pin D Sub sockets. +4dBu nominal (+26dBu maximum)
Headphones 1/4” TRS and 3.5mm Jack sockets (mono) 150mW minimum 30 ohms to 300 ohms
Frequency Response
Input to output +0.25/-0.5dB 10Hz to 20kHz.
THD+n
Input to output, +4dBu 1kHz 48kHz Sample rate 0.006% (20-22kHz)
Input to output, +14dBu 1kHz 48kHz Sample rate 0.0045% (20-22kHz)
Input to output, +25dBu 1kHz 48kHz Sample rate 0.005% (20-22kHz)
Input to output, +4dBu 10kHz 48kHz Sample rate 0.005% (20-22kHz)
Input to output, +14dBu 10kHz 48kHz Sample rate 0.004% (20-22kHz)
Input to output, +25dBu 10kHz 48kHz Sample rate 0.013% (20-22kHz)
Headroom
Analogue Headroom from nominal input (+4dBu) 22dB
Digital Headroom from nominal (-22dBFS) 22dB
ADC & DAC
ADC & DAC word length 24 bit
Sample Rate 44.1, 48, 88.2, 96 kHz
ADC Dynamic range 114dB (A Weighted)
DAC Dynamic range 118dB (A Weighted)
Noise
Output DAC noise (Input routed through to output) -80dBu (20-22kHz) (106dB Dynamic Range)
Output DAC noise (output volume to minimum) -86dBu (20-22kHz)
SPECIFICATIONS
Channel Meter LEDs
Signal LED (Green) -16dBu input (-42dBFS)
Hi Level (Red) +20dBu input (-6dBFS)