Allen&Heath ICE-16D - Manual (Page 25)

Allen & Heath 25 ICE-16D User Guide
THE FIREWIRE DRIVER CONTROL PANEL (PC)
Click Synchronisation to view the sta-
tus and access control over the sync
options.
The clock master can be set to be the
ICE-16 internal clock (recommended)
or the pc driver.
The sample rate can be selected to be
set manually or by the clock master.
Manually is recommended as a default,
the sample rate can still be set by your
DAW in this setting.
The sample rate option box will display
the current sample rate and a drop
down selection will show available rates
if in manual set mode.
The Settings page of the control panel
shows the buffer depths for the audio
data stream and the ASIO and Win-
dows driver.
You can adjust the settings using the
sliders to increase or decrease the
buffer depth depending on your com-
puter system. For minimum latency use
lower buffer depths. Increase them if
you experience audio dropouts or
clicks.
Click Streams in the menu pane to view
details of the digital audio data stream
and synchronisation connectors.
Important! If you change Synchro-
nisation Mode to “Slave to Audio
Clock Master”, ensure you swap
back to “Device Internal Clock”
before using ICE for USB direct
recording.